King Accessories

Kingtesters.com
A division of Accurate Calibration (www.accal.com).
(We are dealers for Bulut America and Detroit Testing Machine Company)
(We are not King Tester Corp.)
Home

Chain Adapter:
Used for large cylinders it fits onto a standard test head and wraps around specimens that are too big for regular tester. High strength chrome/molybdenum steel arms hold the chain to the test head and allow it to stay ridged while the chain takes the full thrust of the load. Supplied with 4' chain.

Reverse Direction Load Adapter
Used inside pipes, tubes and other interior locations that are otherwise impossible to reach. Consists of an anvil which drops into the base and contains a 10mm ball penetrator: and a reverse direction load head, which screws onto the ram.

Adapter to Hold Test Head Upright without Base
For testing large flats it enables test heads to be used under large drill presses, boring mills, arbor presses and beams that are capable of withstanding 3000 kg load.

Standard Test Head
Calibrated accuracy to 1/2 of 1% load. Releases at 3,000 kg automatically. Capable of incremental loads.

2.5 & 5mm Ball Adapter
Used on softer materials or where a smaller impression is desired.

Standard Test Head with Long Ram
Same features as standard test head plus a long ram that puts impression head at end of 2'' extentsion for easy access into recessed areas or over raised edges.

Low Pressure Test Head
Applies load and indicator dial are coordinated for soft metals. Can be calibrated to release at loads of 62-1/2 kg, 125 kg, 250 kg, 500 kg or 1000kg.

Low Pressure Test Head with Long Ram
Same features as low pressure test head plus puts head at end of 2'' extension for easy access into recessed areas or over raised edges.

Base
14'' base with 14'' test height opening and 4'' throat is standard. Optional 6'' throat with either 14'' or 20'' test height opening available. 20'' base also available with 4'' throat and 20'' test height opening.